top of page


Public·31 friends

How To Switch From A Windows Phone To IPhone: Step By Step Guide [Extra Quality]

Mobile device or work phone call: Enter your mobile device number and get a phone call for two-step verification or password reset. For step-by-step instructions about how to verify your identity with a phone number, see Set up security info to use phone calls.

How to switch from a Windows Phone to iPhone: Step by Step Guide


After you've created and deployed a mobile device management policy, each licensed Microsoft 365 user in your organization that the device policy applies receives an enrollment message the next time they sign into Microsoft 365 from their mobile device. They must complete the enrollment and activation steps before they can access Microsoft 365 email and documents. For more info, see Enroll your mobile device using Basic Mobility and Security.

It is very easy to export contacts from Windows Phone and transfer them to iPhone with CopyTrans Contacts. Just follow the steps below and transfer data from Windows Phone to iPhone.

TeamViewer is a fast and secure all-in-one solution for gaining access to computers and networks remotely. With a range of powerful remote access features that make light work of remote control, meetings and maintaining a cloud-based service desk, there is a host of resources showing you exactly how to harness the full power of TeamViewer. With helpful user manuals, first step documents and general how-to guides available, you will learn exactly how to use TeamViewer to the fullest. Whether using the all-in-one solution as an IT department or a managed service provider, intuitive functions such as Wake-on-LAN, unattended access and ticket assigning are all at your disposal.

After your device has finished encrypting its data and rebooted, you'll have to again enter your PIN or password to get back into Android. Once there, you're ready to factory-reset the device.Because different device makers tweak Android to their own liking, the instructions for this next step (and Android instruction in general) will vary from device to device.

  • To configure a trunk port on a Cisco 2960 switch:\n\nEnter configuration mode:\n\nconfigure terminal\n\nSpecify the port to use:\n\ninterface \n\nConfigure the port as a Layer 2 trunk:\n\nswitchport mode trunk\nThese options mean:\n\ndynamic auto \u2013 The Default. Creates a trunk link if the neighboring interface is set to trunk or desirable mode.\ndynamic desirable \u2013 Creates a trunk link if the neighboring interface is set to trunk, desirable, or auto mode.\ntrunk \u2013 Sets the interface in permanent trunking mode.\n\n\nSpecify a default VLAN to use for back up. This is optional:\n\nswitchport access vlan \n\nSpecify the native VLAN:\n\nswitchport trunk native vlan \n\nExit the config mode:\n\nend","author":"@type":"Person","name":"Tim Keary","description":"Since 2017 Tim has been a full-time tech copywriter. Tim writes extensively on net admin topics helping businesses and entrepreneurs to keep their data protected.\n","url":"https:\/\/\/author\/tim_keary\/"}},"@type":"Question","name":"How do I set a static IP on a Cisco switch?","answerCount":1,"acceptedAnswer":"@type":"Answer","text":"A problem with the GUI interface of Cisco switches makes it impossible to assign a static IP address to an interface. Follow these steps for a workaround:\n\nCreate a text file on your PC. It doesn\u2019t matter where you save it or what you call it, but make sure you remember where it is. Substitute real values for the tokens shown in angle brackets () below. The text in the file should be:\n\nConfig t\nInterface \nNo\u00a0ip address DHCP\nY\nNo\u00a0ip address \nIP address \nExit\nIP default-gateway \n\nAccess the admin menu of the switch for Switch Management.\nIn the menu, click on Administration, then File Management, and then select File Operations.\nIn the File Operations screen, set the following:\n\n\nOperation Type: Update File\nDestination File Type: Running Configuration\nCopy Method: HTTP\/HTTPS\nFile Name: (Browse to select the file you created on your PC).\n\n\nClick on Apply.\n\nThese steps will create a static IP address, which you can check by going from the main menu to IP Configuration > IPv4 Interface.","author":"@type":"Person","name":"Tim Keary","description":"Since 2017 Tim has been a full-time tech copywriter. Tim writes extensively on net admin topics helping businesses and entrepreneurs to keep their data protected.\n","url":"https:\/\/\/author\/tim_keary\/","@type":"Question","name":"Do I have to configure a Cisco switch before it gets to work?","answerCount":1,"acceptedAnswer":"@type":"Answer","text":"No. The typical Cisco switch is ready to go out-of-the-box. However, you might want to change some parameters to customize its operations.\u00a0","author":"@type":"Person","name":"Tim Keary","description":"Since 2017 Tim has been a full-time tech copywriter. Tim writes extensively on net admin topics helping businesses and entrepreneurs to keep their data protected.\n","url":"https:\/\/\/author\/tim_keary\/"]} "@context":"http:\/\/","@type":"BreadcrumbList","itemListElement":["@type":"ListItem","position":1,"name":"Home","item":"https:\/\/\/","@type":"ListItem","position":2,"name":"Net Admin","item":"https:\/\/\/net-admin\/","@type":"ListItem","position":3,"name":"How to Configure Cisco Switch in 10 Steps: Tutorial with Commands","item":"https:\/\/\/net-admin\/configure-cisco-switches\/"]Net Admin

How to Configure Cisco Switch in 10 Steps: Tutorial with Commands We are funded by our readers and may receive a commission when you buy using links on our site. How to Configure Cisco Switch in 10 Steps: Tutorial with Commands Configuring a Cisco switch properly means your network can make connections efficiently. In this step-by-step guide, we walk you through configuring Cisco switches and look at some FAQs. Tim Keary Network administration expert UPDATED: January 9, 2023 body.single .section.main-content.sidebar-active .col.grid-item.sidebar.span_1_of_3 float: right; body.single .section.main-content.sidebar-active .col.grid-item.content.span_2_of_3 margin-left: 0;

The next step is to configure passwords for Telnet and console access. Configuring passwords for these is important because it makes your switch more secure. If someone without authorization gains telnet access then it puts your network at serious risk. You can configure passwords by entering the following lines (See the top paragraph for Telnet and the bottom paragraph for Console access).

It is also a good idea to use a network traffic analyzer to monitor network traffic. As a Cisco device, your switch will have the communication protocol NetFlow. However, it must be configured first. You can configure NetFlow by completing the four steps below. Before we begin, enter Global Configuration Mode by executing the following command:

The best option is to use the cloud. If you've been using Windows 10 Mobile then there's a strong chance you had your phone set to auto-upload your photo library to OneDrive. If you didn't have it set this way, there's still time to do so and upload your entire photo library to Microsoft's cloud. You can also upload your iPhone photos to OneDrive, so you don't have to switch from what you're familiar and comfortable with.

Most people that come to us to migrate their email to Office 365 are under the impression that it's a really easy process. You have no idea how many times I've heard, "you're just copying and pasting a bunch of .pst files". So I'm publishing my step-by-step guide for migrating Gmail to Office 365 to show everyone how to do it themselves.

Setting a passcode on your mobile device is a good basic security step and an important part of protecting your data. This will help keep unauthorized users off of your device and can help if your device is ever lost or stolen. Each time you turn on or wake up your device, it will ask you for your passcode before you can use the device. This documentation will guide you in setting a passcode but you should also take additional security steps (such as setting remote wipe) if your device will have personal data on it.

To sum up, this post has shown how to sign out of OneDrive and sign in to OneDrive with the step-by-step guide. If you want to do that, try the above method. If you have any different ideas of logging out of OneDrive or signing in to OneDrive, you can leave a message in the comment zone.

Such a thing can happen to any app and does give you a good reason not to update automatically. The adage "If it ain't broke, don't fix it" holds true. If you've faced any such situation and want to stop updating apps automatically, follow the steps in this guide.


Our collective team consists of everyone that supports NOERA...
bottom of page